2016 EZM328(GM328R)transistor tester/ frequency meter / square wave genera

Description

Product Overview
2016 EZM328(GM328R)transistor tester/ frequency meter / square wave genera
Features:
Add function :
Rotary coding switch
Rotating menu
Frequency meter interface
Precision reference source.
I. Overview
1 using the 2016 version of the latest V1.12K software, using M328 chip,, more features, in addition to the basic functions, as well as extensions.
2 micro-controller uses 8MHz external crystal, the measurement accuracy is better.
3 affect the accuracy of the relevant resistance using a thousandth of a metal film resistors, and the remaining one percent is also used metal film resistors.
4.LCD using 12864 LCD screen that can display measured data and graphics.
5 main chip dual in-line and with a socket, ideal for electronics enthusiasts upgrade or replace the chip.
6 uses 9V laminated battery.
7 All components are made ??of high quality genuine. LCD screen for low power backlit screen, the backlight current of about 2mA, so after boot time has backlighting for easy use in the dark.
8 Dimensions: 72 (W) X 85 (high) X22 (depth) mm.
9 Weight: about100grams.
The Working Current: 9V voltage, stable operating current of about 20mA.
A, the basic function
1 one-button operation, automatic shutdown.
2 shutdown current is only about 20nA.
3.Adopt 8MH crystal.
4 can automatically detect NPN, PNP bipolar transistors, N-channel and P-channel MOS FET, JFET, diodes, dual diode, thyristor small power unidirectional and bidirectional thyristor.
5 automatic identification pin arrangement of components.
Current amplification factor and base 6 measuring bipolar transistor - emitter threshold voltage.
7 can be extremely via the base - emitter threshold voltage and high-current amplification factor identification Darlington transistors.
8 protection diodes can detect bipolar transistors and MOS transistors.
9 measuring MOS FET gate threshold voltage and gate capacitance.
10. can simultaneously measure two resistors and resistor symbol is displayed. 4-digit display with decimal value 11 on the right. Resistance symbol is displayed on both sides of the pin number. So you can measure the potentiometer. If the potentiometer wiper position will not be transferred to a certain extreme, we can distinguish between the middle and both ends of the pins.
11 resistance measurement resolution is 0.1 ohms, 50M ohms can be measured.
12 can measure capacitance. Capacitor symbol is displayed on the right display values ??can be displayed with a decimal four values. Can measure the capacitance of 30pF-100mF resolution 1pF.
13.2uF more capacitors can measure the value of the equivalent series resistance. The two values ??can be displayed with a decimal, resolution 0.01 ohms.
Two diodes 14 can be displayed in the correct order and a diode symbol, and gives the diode forward voltage.
15.LED is detected as a diode, a higher forward voltage. Combo of the LED is recognized as two diodes.
16. reverse breakdown voltage is less than 4.5V zener diode can be identified.
17 can measure a single diode reverse capacitance. If the connection base and collector of the bipolar transistor or the emitter of a pin, or the reverse can be measured or the collector junction capacitance of the emitter junction.
18 with a single measurement can get connections rectifier bridge.
19 Although the measurement limit capacitance of 25pF, but you can be measured by the measured capacitance with a known volume of at least 25pF capacitor in parallel, then the measure will result in parallel capacitance obtained by subtracting
B. extensions (via menu selection, and the user may want to add a few components, suitable for DIY)
1 can measure 1Hz-2MHz frequency. Above 25kHz resolution of 1Hz, the low-frequency measurements using the cycle, the resolution can go to 0.001MmHz.
2 can measure DC voltages below 50V.
3 can produce a square wave signal of 1Hz-2MHz.
4 can generate a fixed frequency pulse width but variable pulse wave, short key width by 1% increments, the longer the key width by 10% increments.
5. Can be activated by the individual capacitance and menu functions, ranges 2UuF-50mF, since the amplitude of the measured signal is only 300mV, it is possible to measure the road. (Translation: due to non-4-wire measurement, the measurement lead resistance may lead to large errors, particularly small measurements).
6 by adding a rotary coding switch, convenient menu item selection.
Package Included:
1x DIY KITS
EZM328(GM328R)transistor tester/table / LCR / frequency meter / square wave genera
1X CABLE
3XClip
Shipping Policy
Item Location
Payment Mathord
Returns Policy
About Feedback
Shipping Policy
1. We Ship to Worldwide
2. We ship your orders within 1-2 business days after the payment cleared.
3. Item shipped from China via china Post Airmail, reach most of the countries within 2 to 4 weeks.
4. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don't receive
the item after 25 days,please contact us, we'll investigate and solve the delivery problem.
5. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges
are the buyer's responsibility. Please check with your country's customs office to determine what these
additional costs will be prior to bidding or buying.
Item Location
ShenZhen
Payment Mathord
1. We accept PAYPAL only.
2. Payment must be made within 7 days of auction closing (Unpaid dispute will automatically open when item
is not paid in 7 days).
3. PLEASE NOTE: SHIPPING&HANDING DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
4. Please list your special requests (color, packages, value of declaration, etc.) in the EBAY NOTES SECTION
when you make payment
Returns Policy
1. Customer satisfaction is our top goal. All products are quality checked. They are new and in good
condition when shipped to our customers. If product is defective or damage upon arrival, or wrong
product shipped, please contact us immediately. Returns accepted within 14 days of delivery date
and item must be in original new condition, not worn or altered in any way with attached tags & wrap.
Otherwise deal is final. Return shipping must be paid by buyer.
2. Please contact us first if you have anyproblems/questions/concerns. We will be happy to resolve
any issues you may have in a cordial and friendly manner.
3. We appreciate your Positive Feedback, and will do the same in return. PLEASE DO NOT leave
negative feedback without first communication with us. Please allow max 24 HOURS for us to respond
About Feedback
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is
very important to us. We request that you contact us immediately BEFORE you give us neutral or
negative feedback, so that we can satisfactorily address your concerns.It is impossible to address
issues if we do not know about them!