-40%

220V Cylindrical Wardrobe Closet Door Window Proximity Switch Magnetic Sensor

$ 4.47

Availability: 38 in stock
  • Refund will be given as: Money Back
  • Brand: Unbranded/Generic
  • Material: Flame retardant ABS & Metal
  • MPN: T1QWMZEWMW
  • Life: more than 1 million times
  • Condition: New
  • Restocking Fee: No
  • All returns accepted: Returns Accepted
  • Length: Cable: approx.30cm(11.81inch)
  • Type: Switch: Normally Open
  • Return shipping will be paid by: Buyer
  • Size: Switch:2.6x1.2cm(LxD);Magnet:1.8x1.2cm(LxD)
  • Working temperature: -40 ~ 70 degrees Celsius
  • Coil Voltage: Operating: 100V-220V (AC or DC)
  • Suitable: for doors, cupboard door, closet etc
  • Item must be returned within: 30 Days
  • Color: Black & Blue
  • Country of Manufacture: China
  • Manufacturer Part Number: Does Not Apply

    Description

    Black 220V Wardrobe Closet Door Window Magnet Sensor Proximity Switch N/O
    Condition:
    100% new
    Color:
    Black & Blue
    Material:
    Flame retardant ABS & Metal
    Cable Length:
    approx.30cm(11.81inch)
    Switch size:
    approx.2.6 x 1.2cm(1.02 x 0.47inch)(L x D)
    Magnet size:
    approx.1.8 x 1.2cm(0.71 x 0.47inch)(L x D)
    Switch type:
    Normally Open
    Installation:
    Drilling
    Use of power:
    50W maximum load energy saving lamps 600V/4A
    Operating voltage:
    100V-220V (AC or DC)
    Operating temperature:
    -40 ~ 70 degrees Celsius
    Life:
    more than 1 million times
    Suitable for:
    doors, cupboard door, closet etc.
    Item included:
    1 x Switch With Cable
    1 x Magnet
    Note:
    1) All dimensions are measured by hand, there may be small deviations.
    2) Color may vary slightly due to the color setting of each individual monitor.
    Product Dimension:
    Feature:
    1) 100% new and high quality.
    2) This switch is normally open type, when magnet close the switch ,the lamp goes off,when the magnet is remove the lamp is on.
    3) Easy to install and use.
    4) Sensor is a magnetic field proximity sensor operation, the magnet close to or away from, you can control the sensor is closed or open.
    Installation:
    1) Sensor (with line side) should be installed on the door frame, magnetic side (without cable side) mounted on the door.
    2) Sensors and magnetic side must be installed parallel to the door, besides, the edge distance gap between sensors and magnet should not exceed 10mm.
    3) Please be sure to install the load (fluorescent, energy saving lamps, spotlights) first and then supply power.
    4) Can not use multimeter to test the door magnetic switch is on or off.
    5) Power supply regardless of positive and negative.