DE-5000 LCR Meter, TL-21, TL-22, TL-23, Case, Adapter, USB conversion case/ CDR

Description

DE-5000 LCR Meter, TL-21, TL-22, TL-23, Case, Adapter, USB conversion case/ CDR
Description
[DE-5000]
LCR meter for full-auto and high-precision measurement
◆ Features
★ LCR parameters are automatically selected and measured in the optimal range
★ Parallel (Lp / Cp / Rp) / Serial (Ls / Cs / Rs) mode switching
★ 4-wire Kelvin connection measurement / 2-wire connection measurement
★ Test frequency: 100/120 / 1k / 10k / 100kHz
★ D, Q, Θ, ESR can be measured !!
There is no LCR meter that can measure this in this ordinary price range !!
★ Dual display: main 20000 / sub 2000 count
★ Relative mode / Parts classification function
★ With Japanese manual provided by the manufacturer!
◆ Main specifications ・ LCD: Main display section 19999 (4 + 1/2 digits), sub display section 9999 (4 digits), percentage bar graph, etc.
・ Measuring range (main display)
L: 20.000μH (minimum resolution 0.001μH)-2000H
C: 200.00pF (minimum resolution 0.01pF)-20.00mF
R: 20.000Ω (minimum resolution 0.001Ω) to 200.0MΩ
・ AC test frequency: 100Hz / 120Hz / 1kHz / 10kHz / 100kHz (/ DC)
・ Measurement rate: 1.2 times / second
・ Dimensions and mass: H18.8cm × W9.5cm × D5.3cm 350g
・ Power supply: 9V (B-03257), with auto power off (about 5 minutes) function
-Product configuration: DE-5000 (this unit), Japanese instruction manual,
↓ Refer to the following PDF file for detailed specifications.
* By using the separately sold cord with banana plug (banana plug plum insect clip) [mail order code C-05071], large parts and parts with short leads can be easily measured.
* By using the optional tip probe (TL-22 SMD M-06267), surface mount components can be measured easily and with high accuracy (4-wire Kelvin connection measurement).
* L: coil, C: capacitor, R: resistance
* D: loss factor, Q: quality factor :, Δ: phase angle, ESR: equivalent series resistance
[TL-21]
This is a genuine test lead for DER-EE's LCR meter DE-5000.
It enables 4-terminal Kelvin connection measurement of large parts.
One-touch mounting on the measurement terminal of the DE-5000 main unit.
◆ Main specifications
・ One-touch attachment / detachment method, with banana jack for guard
・ 4-wire Kelvin connection (the connection with the measuring instrument is gold-plated)
・ Cable: Approximately 45 mm long, 2-core shielded wire x 2
・ Measurement flow: Bagworm clip Red: + (plus) pole / Black:-(minus) pole
・ Opening interval at the tip of the clip: Approximately 6 mm
・ End of measurement terminal (+/- each pole): Clip base
Tip probe TL-22 SMD
[TL-22 SMD]
This is a genuine probe for DER-EE's LCR meter DE-5000.
4-terminal Kelvin connection measurement of chip parts is possible.
One-touch mounting on the measurement terminal of the DE-5000 main unit.
■ Main specifications
・ One-touch attachment / detachment method, measurement +/- polarity display, with banana jack for guard
・ 4-wire Kelvin connection (the connection with the measuring instrument is gold-plated)
・ Cable: Approximately 60 cm long, 4-core shielded wire
・ Measurement flow (tweezers): Approximately 12.5 cm (contact part is gold-plated)
・ Opening interval of probe tip: Approximately 1 cm (maximum 1.5 cm)
・ End of measurement terminal (+/- each pole): Contact base
[TL-23]
This is a genuine guard line for DER-EE's LCR meter DE-5000.
Cable with bagworm clip for guard (grounding) during high impedance measurement.
The guard terminal of the DE-5000 main unit and the genuine option TL-21,
It is used by attaching it to the guard terminal of TL-22.
◆ Main specifications
・ Banana plug for guard terminal (L type) + cord with bagworm clip
・ Cord: Approximately 98 cm long, coated stranded wire
・ Opening interval at the tip of the clip: Approximately 6 mm
Case for LCR meter, DE-5000. The DE-5000 main unit and dedicated accessories can be combined into one, making it convenient to carry. Made of high-density polyethylene, it is solidly made.
AC adapter for DE-5000
[GS2U-006-0900660-LS]
DC9V adapter for LCR meter "DE-5000 (M-06264)". You can cancel the auto power off of DE-5000 by using it with the AC adapter.
■ Main specifications
・ Output voltage: DC9V
・ Rated output current: 660mA
・ Input: AC100 ~ 240V 60 / 50Hz
* It is a thin DC plug for DE-5000.
* The model number and appearance change frequently depending on the lot. Please note that the photo may be replaced each time, but depending on the timing, we may deliver a product with a different appearance from the photo.
USB conversion case / CD-ROM for LCR meter DE-5000
PC interface module for LCR meter DE-5000.
Used by attaching to the infrared communication port of the DE-5000 main unit. Send measurement data to PC via USB.
With data display / recording software for Windows PC
With USB cable [A male-mini B male] (mail order code [C-07606])
◆ Main specifications
・ Infrared communication module (one-touch attachment / detachment to DE-5000 body, with lock mechanism)
・ USB mini B jack (female)
-Supported Windows version: Vista, 7
8 / 8.1 / 10 Please see "Frequently Asked Questions (Q & A)" for how to respond.
-All data imported to the PC can be saved in CSV format together with the measurement date and time information.
Shipping
Economy   Shipping 14- 20days.
Expedited  EMS 5-7days.
Payment
We only accept PayPal payments. Please pay within 5 days after auction is finished.
About Us
We are all Japanese staff. We deal all merchandises carefully.
Note
You can choose EMS or Registered Air as shipping method. EMS:takes about 5 days, with tracking number Registered Air:takes about 2 weeks with tracking number I accept only PayPal as payment.
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.  Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
We do not mark merchandise values below value or mark items as "Gifts" US and international govenment regulations prohibit such behavior.
We are Japanese. Don't hesitate to ask us if you have any questions.