DER EE DE-5000 Handheld LCR Meter / TL-22 Tip probe / 2 SET Japan New Authentic

Description

DER EE DE-5000 Handheld LCR Meter / TL-22 Tip probe / 2 SET Japan New Authentic
Description
LCR meter for full-auto and high-precision measurement
◆ Features
★ LCR parameters are automatically selected and measured in the optimal range
★ Parallel (Lp / Cp / Rp) / Serial (Ls / Cs / Rs) mode switching
★ 4-wire Kelvin connection measurement / 2-wire connection measurement
★ Test frequency: 100/120 / 1k / 10k / 100kHz
★ D, Q, Θ, ESR can be measured !!
There is no LCR meter that can measure this in this ordinary price range !!
★ Dual display: main 20000 / sub 2000 count
★ Relative mode / Parts classification function
★ With Japanese manual provided by the manufacturer!
◆ Main specifications ・ LCD: Main display section 19999 (4 + 1/2 digits), sub display section 9999 (4 digits), percentage bar graph, etc.
・ Measuring range (main display)
L: 20.000μH (minimum resolution 0.001μH)-2000H
C: 200.00pF (minimum resolution 0.01pF)-20.00mF
R: 20.000Ω (minimum resolution 0.001Ω) to 200.0MΩ
・ AC test frequency: 100Hz / 120Hz / 1kHz / 10kHz / 100kHz (/ DC)
・ Measurement rate: 1.2 times / second
・ Dimensions and mass: H18.8cm × W9.5cm × D5.3cm 350g
・ Power supply: 9V (B-03257), with auto power off (about 5 minutes) function
-Product configuration: DE-5000 (this unit), Japanese instruction manual,
↓ Refer to the following PDF file for detailed specifications.
* By using the separately sold cord with banana plug (banana plug plum insect clip) [mail order code C-05071], large parts and parts with short leads can be easily measured.
* By using the optional tip probe (TL-22 SMD M-06267), surface mount components can be measured easily and with high accuracy (4-wire Kelvin connection measurement).
* L: coil, C: capacitor, R: resistance
* D: loss factor, Q: quality factor :, Δ: phase angle, ESR: equivalent series resistance
[TL-22 SMD]
Manufacturer category DER EE Electrical Instrument Co., Ltd
This is a genuine probe for DER-EE's LCR meter DE-5000.
4-terminal Kelvin connection measurement of chip parts is possible.
One-touch mounting on the measurement terminal of the DE-5000 main unit.
■ Main specifications
・ One-touch attachment / detachment method, measurement +/- polarity display, with banana jack for guard
・ 4-wire Kelvin connection (the connection with the measuring instrument is gold-plated)
・ Cable: Approximately 60 cm long, 4-core shielded wire
・ Measurement flow (tweezers): Approximately 12.5 cm (contact part is gold-plated)
・ Opening interval of probe tip: Approximately 1 cm (maximum 1.5 cm)
・ End of measurement terminal (+/- each pole): Contact base
Shipping
Economy   Shipping 14- 20days.
Expedited  EMS 5-7days.
Payment
We only accept PayPal payments. Please pay within 5 days after auction is finished.
About Us
We are all Japanese staff. We deal all merchandises carefully.
Note
You can choose EMS or Registered Air as shipping method. EMS:takes about 5 days, with tracking number Registered Air:takes about 2 weeks with tracking number I accept only PayPal as payment.
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.  Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
We do not mark merchandise values below value or mark items as "Gifts" US and international govenment regulations prohibit such behavior.
We are Japanese. Don't hesitate to ask us if you have any questions.