M328 LCD 12864 Transistor Tester DIY Kit Diode Triode Capacitance LCR Meter

Description

Home
Modules
Sensor
Arduino
Raspberry Pi
3D Printer
Chips
M328 LCD 12864 Transistor Tester DIY Kit Diode Triode Capacitance LCR Meter
NOTE
: This is a
DIY
kit !!!!
Multi-functional transistor tester for automatic detection of NPN and PNP transistors, N-channel and P-channel MOSFET, diodes, thyristors, resistors, capacitors or other devices. Also can be used as frequency meter or square signal and PWM signal generator.
Features:
Digital 12864 LCD display, easy to read.
Can be powered by 9V battery(not included).
Automatically detect NPN and PNP transistors, N-channel and P-channel MOSFET, JFETs, diodes, inductors, resistors, capacitors, thyristors or other devices.
Support 2 resistors measurement, also support potentiometer measurement.
Automatically test the pins of a component and show on the display.
Measure the gate threshold voltage and gate capacitance of the MOSFET.
Measure bipolar transistor current amplification factor and base-emitter threshold voltage.
Short detection time: only 2 seconds. It costs more time for bulk capacitor detection.
Can be used as signal generator and frequency meter. Different built-in square signals from 1Hz-2Mhz are available to choose. It can generate 1-99% PWM(pulse width modulation) signals.
How to use:
1. Resistor welding. If you are not familiar with the chromatic circles, please check the resistance with a multimeter.
2. Other components welding. Please make sure the transistor type and direction are correct.
3. Connect with power supply(9V battery or 5.5V-12V external DC power supply) instead of connecting with M328 and the LCD. Then measure the voltage between pin 7 and pin 22 with a multimeter. If the voltage is +5V, it means the meter is working in normal condition.
4. Cut off the power supply, connect with M328 and the LCD. When all installation finished, connect with the power supply.
5. Detailed installation guide: https://www.dropbox.com/sh/uo7nr7xet09esbu/AAAMAjU0sE2hFqCXe0VAsGM_a?dl=0
Note:
The testing picture is just for reference, please in kind prevail!
Specifications:
Display: 12864
Voltage: DC5.5-12V
Current: 24mA
Power Supply: 9V Battery(not included)
Resistance Measurement: Max.50MΩ
Resistance Resolution: 0.1Ω
Capacitance Measurement: 25pF~100mF
Capacitance Resolution: 1pF
Inductance Measurement: 0.01MH~20H
Screen Size: 5 * 3.5cm / 2 * 1.4in
PCB Size: 7.5 * 6cm / 3 * 2.4in
Package Size: 9.5 * 9.5 * 3.5cm / 3.7 * 3.7 * 1.4in
Package Weight: 81g / 2.8oz
Package Included:
1PCS *  Transistor Tester DIY Kit
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.