NEW AHRS Calman Magnetic Filter Sensor 9Axis Navigation Module BNO-55 Compass

Description

NEW AHRS Calman Magnetic Filter Sensor 9Axis Navigation Module BNO-55 Compass
Product Image:
Product Description:
Product Description
GY955 is a low cost AHRS module.
Working voltage 3-5v power consumption is small, small size.
Its working principle is through the gyroscope with
Acceleration pass, magnetic field sensor through data fusion
The algorithm finally gets direct angle data.
This module uses the serial (TTL level)
way of communication. The product has high precision and high stability.
Able to get an accurate angle in any position,
Serial baud rate of 9600bps and 115200bps
There are two ways of continuous output and inquiry output,
Can adapt to different working conditions.
With all the microcontroller and computer connection.
Product Parameters
Measuring range: -180 ° ~ 180 °
Resolution: 0.01 °
Measurement accuracy: 2 °
Repeatability: 2 °
Response frequency: 100 HZ (115200 bps)
Working voltage: 3 ~ 5 V
Working current: 15mA
Operating temperature: -20 ° ~ 85 °
Storage temperature: -40 ° ~ 125 °
Size: 14.6mm × 17.8mm
Product Features Technical parameters
Cost-effective
Built-in MCU calculation angle
small volume
Serial communication format
With the corresponding host computer software
Applications
Handheld instrumentation
Robot navigation, positioning
Voyage model system
Balance car
Antenna pitch positioning
Pin description
VCC: Power supply + (3v-5v)
TX: Serial UART_TX (TTL level)
RX: Serial UART_RX (TTL level)
GND: Power ground
SI: Reserved, do not connect
SR: Reserved, do not connect
REST: BNO055 REST pin
ADD: BNO055 I2C address pin
SDA: BNO055 I2C data pin
SCL: BNO055 I2C clock pin
Package Included:
1*GY-955 AHRS High Stability Calman Filter Sensor 9 Axis Navigation Module BNO-055
Feedback
Warranty
Shipment
Feedback
We appreciate your feedback very much. As it will motivate us do better. If you have any questions with our goods or service, Please kindly contact us firstly before leaving negative feedback. Thank you in advance
Warranty
1. All merchandise will be carefully test before shipping. We will try our best to avoid any quality problem.
2. We promise warranty for quality in one year and we will repair it free of charge. The returning shipping should be paid by customer.
3. If you are not satisfied with the product, Please contact us. We'll provide you a satisfying solution.
Shipment
1.Normmly we will send the goods within 1-3 working days after your payment is verified .
2.Please check if the goods are in good condition and sign before the delivery man leaves.If you find the product is lost or damaged on the way. Please take photo and let the delivery men confirm it. Then we will help you let the shipping company compensate you.
On Nov-08-17 at 00:29:24 PST, seller added the following information: