Precision Bench Top LCR Meter 200KHz Comparator Component Parameter Test TH2816B

Description

Component Parameter Test Instruments and Precision LCR Meter TH2816B
Brief Introduction
TH2816B is a new precision LCR meter combined
with years of technical experience and newest measurement technology of
instrument industry. With powerful measurement functions, high performance
and low cost, TH2816B have been one of the world
advanced instruments, and it provides users a super value measurement
resolution and experience. The meter offers stable 6 digit resolution, wide
frequency range (50Hz to 200kHz), programmable signal level (0.01V to 2.0V),
up to 30 meas/sec measurement rate, 9 measurement ranges, 30Ω or 100Ω constant output
impedance and friendly operation interface. TH2816B can
be used for incoming inspection of components, quality control of product line
and high accuracy laboratory use. The optional HANDLER, GPIB, RS232C interfaces
make it easy to build an automatic component test system, communicate with
the computer and record the test results.
Features:
■ 240×64 dot-matrix graphics LCD display
■ Friendly user's interface and easy operation
■ TH2816B:
37 typical frequency points, 50-200kHz
■
Programmable single-voltage level
from 10mVrms to 2.0Vrms
■ World-level stability and accuracy
■
6 digit readout resolution
■ Up to
30meas/sec
Measurement rate
■ Precision
LOAD correction function
■ Selectable signal source output impedances: 30Ω, 100Ω
■ Direct control function for TH1773/TH1775 DC bias source
■
List sweep function for up to 4 frequencies, signal levels and DC bias levels
■ Direct, Δ ABS and Δ% display modes
■ 12 control setting files memory
■
Built-in comparator
, 10 Bins and bin counters (TH2816A/B)
■ Test signal level monitor function
■ Key lock function
■ Optional Handler interface
■ RS-232C and optional GPIB interfaces
Specifications:
Measurement function:
Test parameter: |Z|, C, L, X, B, R, G, D, Q, θ
Basic accuracy: 0.1%
Equivalent circuit: Series and Parallel
Math function: Deviation and Percent Deviation
Ranging mode: Auto, Hold
Trigger mode: Internal, Manual, External and Bus
Measuring speed:
Slow: 1.5meas/sec
Med: 10meas/sec
Fast: 30meas/sec
Correction function:
Open, Short and Load corrections
M e a s u r e m e n t terminal: 5 terminals
Delay time: 0—60sec , with step of 1ms
List sweep: List sweep for up to 4 frequencies, signal levels and DC bias levels
Display Mode: Direct, ΔABS, Δ%, V/I( V/I monitor), Bin number and bin counter
Display: 240×64 dot-matrix LCD display,
6-digit resolution
Test signal:
Signal frequency:
50Hz to 200kHz , total 37 points;
50Hz, 60Hz, 80Hz, 100Hz, 120Hz,
150Hz, 200Hz, 250Hz, 300Hz, 400Hz,
500Hz, 600Hz, 800Hz, 1kHz, 1.2kHz,
1.5kHz, 2kHz, 2.5kHz, 3kHz, 4kHz, 5kHz,
6kHz, 8kHz, 10kHz, 12kHz, 15kHz,
20kHz, 25kHz, 30kHz, 40kHz, 50kHz,
60kHz, 80kHz, 100kHz, 120kHz, 150kHz,
200kHz
Output impedance:
30Ω , 100Ω
Test level: 10mVrms to 2.0Vrms, 10mV steps
Measurement display range:
|Z|, R,X 0.00001Ω — 99.9999MΩ
C 0.00001pF — 999.999mF
L 0.00001μH — 9.99999kH
G,B 0.00001μS — 999.999S
D 0.00001 — 9.99999
Q 0.00001 — 99999.9
θ(DEG) -179.999o — 179.999o
θ(RAD) -3.14159 — 3.14159
Δ% -999.999% — 999.999%
Comparator, memory & interface:
Comparator Function: 10 Bins(BIN1 to BIN9 , OUT of bins), and additional AUX bin
Memory 12 control settings memory
for store/recall
Optional Interface RS-232C, HANDLER, GPIB
Instrument Accessories:
TH26005A 4 terminal test fixture
TH26011A 4 terminal Kelvin test clip leads
TH26010 Gilded shorting plate
Optional:
TH26047 4 terminal test fixture
TH26048 4 terminal test fixture
TH26006 Axial component test fixture
TH26007 Core inductor test fixture
TH26008A SMD component test fixture
TH26009B SMD Kelvin test tweezers
TH26033 GPIB interface cable
TH26034 RS232C interface cable
TH10001 GPIB interface board
TH12003 RS232C control software(TH2816A)
TH12004 RS232C control software(TH2817A
)